Diagnostic State 5: Lifepulse Test; (Display Lock Equipped Model Only) - Life Fitness 8500 Service Manual

Life Fitness Model 8500, 9100, and 9500HR Cross-Trainers
DIAGNOSTIC STATE 5 – LIFEPULSE TEST

(DISPLAY LOCK EQUIPPED MODEL ONLY)

179
170
162 153
145
136
120 117
114
111 108
105
10 20 3 0 40 50 6 0 70 8 0 90100
A G E
Life Fitness USA: 1-800-735-3867
Life Fitness Intl.: (+1) 847-288-3300
Life Fitness UK: (+44) (0)1353 666017
Upon initial entry to this test, a message concerning the configuration of the lifepulse system being On or Off. This
test will allow the user to test the lifepulse heart rate system.
Following this message, the lifepulse system can be manually tested. A heart will be in the profile window.
The system will show when the user has placed their hands on the lifepulse sensors. When the left sensor detects
hands on condition, a 'L' will be placed in the profile window with the heart. When the right sensor detects hands on
condition, a 'R' will be placed in the profile window with the heart.
A timer will start counting from the time when a both left and right hands on condition occurs to when the lifepulse
system can reliable give the user their heart rate. This timer will stop when the heart rate is given.
The gain value of the heart rate signal is shown. The confidence level of the heart rate value is displayed. The value
ranges from 0 to 9. A value of 9 is considered to be high confidence. A value of 0 is considered to be low confidence.
Press the CLEAR key to return to Diagnostics State 4.
Press the ENTER key to advance to Diagnostics State 6.
Time RPM
®
128 119
111 102
85%
80%
65%
102 99
96
93
60%
Level
Calories
Quick Start:
Press 'Start'
Press 'Quick Workout'
Heart Rate Cal/Hour
Distance Watts
1 2 3
Clear
Pause
4 5 6
Quick
Workout
7 8 9
Display
Lock
0
Start
Start
Aerobics Reverse
Mode Mode
Enter Enter Enter
11