Life Fitness 8500 Service Manual page 46

Life Fitness Models 8500, 9100, and 9500HR Cross-Trainers
How To... Replace the Display Console Support Assembly
Tools required: Phillips screwdriver and Allen wrench set
Monocolumn
Cover
Model 8500/9100 Shown
1. Remove the console and accessory tray. See "How To."
2. Remove the MONOCOLUMN COVER (ALL
MODELS) and ROCKER ARM COVERS (9500).
3. Remove the POLAR RECEIVER.
4. Remove the two(2) HEX HEAD CAPSCREWS and
FLAT WASHERS securing the CONSOLE
SUPPORT ASSEMBLY.
5. Lift the CONSOLE POST out of the
MONOCOLUMN while guiding the wire harness
out.
6. Install new console support in reverse order.
4
Rocker Cover and Screws(3)
Back
Rocker
Cover
Polar
Receiver
Foam Insulator
Monocolumn
Cover
Monocolumn
Cover Screws(4)
10-Pin
Connector
Accessory
Tray Nuts(4)
Display
Console
Screws(4)
Monocolumn
Cover
Model 9500HR Shown
Front Rocker
Cover and Screws(3)
3-Pin
Accessory
Connector
Tray
Hex
Bolts(2)
Flat
Washers(2)
Polar
Receiver
Foam Insulator
Monocolumn
Cover
Monocolumn
Cover Screws(2)
Front Rocker
Cover
Console
Spacer
Accessory
Tray Screws(4)
4-Pin
Connector
(Model 9500)
Console
Support
Assembly
Wire
Harness
Monocolumn