D-Link DI-804HV Manual page 43

Using the Configuration Menu
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-804HV. The DI-
804HV supports SNMP v1.
Enable SNMP-
Local-
Remote-
Get Community-
Set Community-
(Simple Network Management Protocol)
LAN (Local Area Network)
WAN (Wide Area Network)
Enter the password public in this field to allow "Read only"
access to network administration using SNMP. You can view
the network, but no configuration is possible wth this setting.
Enter the password private in this field to gain "Read and Write"
access to the network using SNMP software. The administra-
tor can configure the network with this setting.
43