D-Link DI-804HV Manual page 30

Using the Configuration Menu
Home >VPN Settings > Tunnel (IKE)
VPN Settings - IKE-
Tunnel Name-
Aggressive Mode-
Local Subnet-
Local Netmask-
30
There are three parts that are necessary to setup the
configuration of IKE for the dedicated tunnel: basic setup, IKE
proposal setup, and IPSec proposal setup. Basic setup
includes the setting of following items: local subnet, local
netmask, remote subnet, remote netmask, remote gateway,
and pre-shared key. The tunnel name is derived from previous
page of VPN setting. IKE proposal setup includes the setting
of a set of frequent-used IKE proposals and selecting from the
set of IKE proposals.
Current tunnel name.
Enabling this mode will accelerate establishing the tunnel,
but the device will have less security.
The subnet of the VPN gateway' s local network. It can be a
host, a partial subnet or a whole subnet.
The netmask of the VPN gateway' s local network.