D-Link DI-804HV Manual page 32

Using the Configuration Menu
Home >VPN Settings > Tunnel (Manual)
Tunnel Name-
Aggressive Mode-
Local Subnet-
Local Netmask-
Remote Subnet-
Remote Netmask-
Remote Gateway-
Local SPI-
32
Current tunnel name.
Enabling this mode will accelerate establishing tunnel, but
the device will have less security.
The subnet of the VPN gateway' s local network. It can be a
host, a partial subnet or a whole subnet.
Local netmask combined with local subnet to form a subnet
domain.
The subnet of the remote VPN gateway' s local network. It
can be a host, a partial subnet or a whole subnet.
The subnet of the remote VPN gateway' s local network.
It can be a host, a partial subnet or a whole subnet.
The WAN IP address of remote VPN gateway.
The value of local SPI should be set in hex format.