D-Link DI-804HV Manual page 29

Using the Configuration Menu
Home >VPN Settings
VPN Settings are settings that are used to create virtual private tunnels to remote VPN
gateways. The tunnel technology supports data confidentiality, data origin, authentication
and data integrity of network information by utilizing encapsulation protocols, encryption
algorithms, and hashing algorithms.
VPN -
NetBIOS broadcast-
Max. n u mber of
tunnels-
Tunnel Name-
Method-
-
More
Check here to enable VPN tunnels. When you are not
using the VPN feature, it is best to keep VPN disabled.
Enable this to allow NetBIOS braodcast over the VPN
tunnels.
Select the maximum number of allowable tunnels.
Create a name for the tunnel.
IPSec VPN supports two kinds of key-obtained methods:
manual key and automatic key exchange. Manual key
approach indicates that the two endpoint VPN gateways
require setting up authentication and encryption key by
the Administrator manually. However, IKE approach will
perform automatic Internet key exchange. Admins of both
endpoint gateways will only need to set the same
pre-shared key.
For more indepth configuration to adjust manual
key or IKE method settings, click More.
29