Surround Play - Kenwood VR-6050 Instruction Manual

Ambience effects
Surround play
The DTS compatrble models can reproduce a CD, DVD, or LD carryrng the
DTS mark
DOLBY DIGITAL can be used when playrng DVD or LD software bearrng
the 001 mark and DOLBY DIGITAL format drgrtal broadcasts fete ).
DOl"B;'%b LOGIC can be used when playing vrdeo, DVD. or LD
software bearing the ~UIOOLBY-~OUNDI mark.
SRS Crrcle Surround II enables you to listen to multr channel sound from
the stereo source.
DSP 7 r INPUT MODE
Input Selector LISTEN MODE
INPUT MODE
INPUT
SELECTOR
'LISTEN MODE a/o
-DSP MODE
Preparations
l
Turn ON related components
l
Complete "Preparrng for surround sound" (speaker settings)
-Lpi
l
Use the Input Selector keys to select the component you wish to play
back wrth surround sound
l
Use the INPUT MODE key to select the Input mode (analog 01 digital)
for the source you wash to play back - Pi
l
Norse WIII be produced when a DTS source IS played by selectrng the
analog rnput
q
Start playing the video software.
a Use the LISTEN MODE knob or LISTEN MODE n/O keys to
select the listening mode.
The Irstening mode settrngs are stored separately for each Input if
the Input mode IS set to full auto ("AUTO DETECT" Irghts), the
recerver selects the optrmal lrstenrng mode automatrcally based on
the type of input slgnal and the speaker settrngs
Each turn of the LISTEN MODE knob or press of the LISTEN
MODE n/v keys switches the setting as listed below.
The listening mode settings are different depending on the type
of input signal.
When the DOLBY DIGITAL signal is input:
(The DOL.BY DIGITAL or PRO LOGIC, Indicator Irgl?ts up )
1
DOLBY DIGITAL
2 DOLBY D EX
3 PLII MOVIE
4 PLII MUSIC
5 PRO LOGIC
6 STEREO
DOLBY DIGITAL surround
DOLBY DIGITAL EX surround
PRO LOGIC II surround MOVIE mode
(The PRO LOGIC rndrcator lrghts up )
PRO LOGIC II surround MUSIC rmode
(The PRO LOGIC rndrcator lights up i
PBO LOGIC II surrourrd PRO LOGIC mode
(The PRO LOGIC rndrcatot lights up 1
Normal stereo playback
When you select DOLBY DIGITAL
"DOLBY DIGITAL" wrll be drsplayed
When the DTS signal is input :
(The DTS rndrcator lights up.1
c
1 DTS : DTS surround
2 STEREO : Normal stereo playback
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input:
:
i PLB MOVIE :
2
PLII MUSIC :
3 PRO LOGIC :
4 CSB CINEMA :
5 CSII MUSIC :
6 CSII MONO :
i STEREO :
PRO LOGIC U surround MOVIE mode
(The PRO LOGIC kndtcator lrghts up.)
PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC lndlcator lrghts up.)
PRO LOGIC II surround PRO LOGIC mode
(The PRO LOGIC rndrcator lrghts up.)
CS 6.1 surround.
(The CS U rndrcator lrghts up.)
CS 6 1 surround.
(The CS II rndrcator lrghts up.)
CS 6.1 surround
(The CS II lndlcator lights up.)
Normal stereo playback. Sound IS produced
from the two front channels only.
(The STEREO rndrcator lights up.1
l
Dolby DIgItal or DTS
,,
signal havrng more channels than the maxi-
mum numoer OT playback channels avarlable using the receiver's
current settings IS input, downmrxrng IS performed to match the
number of avariable channels.
q
DSP mode (Digital Signal Processor).
DSP can produce these effects wrthout spoilrng the sound qualrty of
the orrgrnal mux or video source.
0 Pressing the DSP or DSP MODE key will display the current
DSP MODE status.
e Each press of the key will switch to the next status as shown
bellow:
1
1 ARENA : DSP surround ARENA mode.
2 JAZZ CLUB
: DSP surround JAZZ CLUB mode.
3
THEATER
: DSP surround THEATER mode.
4
STADIUM
: DSP surround STADIUM mode.
5
DISCO
: DSP surround DISCO mode.
l
The DSP mode selectron IS drsplayed forapproxrmately 3 seconds.
l
For fine adjustmentof the DSPeffects, pleaserefer to "Adjusting
the sound"
-pg
a Adjust the volume.
Notes
l
Depending on the type of the signal or speaker setting, some listenrng
modes cannot be selected
l
Wherl playback IS started, the sound may be cut or Interrupted before
the input source IS confirmed as Dolby Drgrtal
l
To enjoy Dolby DIgItal surround (as well as all the other lrstenrng modes)
from a single component, be sure to use a Dolby Digital compatible
soLlrce component
29 EN