Setup For Surround Play - Kenwood C-V750 Instruction Manual

The feeling of presence in the surround effects can be
improved by performing the following adjustment proce-
36
dure according to the speaker system and listening room
environment in use.
Once they are adjusted, re-adjustment is not necessary even
after the surround mode is switched to other modes.
Adjustment sequence
Adjustment
Balance
with test tone
adjustment

Setup for surround play

1
Select the Dolby mode.
Main unit
P
2
Adjust the balance. "L- - - - - - -R"
Main unit
1 Select the Balance adjustment display.
MU
MODE
2 Adjust the levels of the front speakers
(Left, Right) so that they sound identical.
MULTI.CONTROL
LEVEL
To decrease To decrease
right channel left channel
level level
3 Quit the balance adjustment.
Delay time
adjustment
GRC
ENTER
PRO LOGIC
ENTER
GRC
Set Up
ENTER
Sound
ENTER
Tone/
Balance
ENTER
+
L 7 R
|||||||||| ||||||||||
To decrease right To decrease left
channel level channel level
ENTER
Return
ENTER
Main operation menu
÷ Select the Dolby mode according to the played source and component
in use.
÷ The AC-3 mode can be used when the Dolby Digital signal is available.
÷ Switching is not possible when the 6ch INPUT is used.
Main unit
Display Dolby mode
PRO LOGIC :Dolby Pro Logic
3 STEREO :Dolby 3 Stereo
AC-3 :Dolby Digital (AC-3)
GRC
Sound
PRO LOGIC
Select an icon.
(The displayed icons may be variable
3 STEREO
depending on the model.)
STEREO
AC-3
Main unit
Each press switches the adjusted items as shown below.
1 BASS
:Tone, Bass
2 TREBLE
:Tone, Treble
3 L- - - - - - -R :Balance
4 C ch
:Center speaker
5 SR ch
:Surround speaker, Right
6 SL ch
:Surround speaker, Left
7 SW ch
:Subwoofer
8 DELAY
:Delay time
9 INPUT
:Input level
÷ Adjustment items 5, 6 and 8 are not required in the 3 STEREO mode.
÷ The adjusted items which can be selected with 6ch INPUT are 3, 4, 5,
6 and 7, in this sequence.
÷ Those which can be selected when SOURCE DIRECT is ON are 7 and 9.
Position of the
Indicates the center
left speaker
L - - - y t - - R
Indicates the balance setting
If no key on the main unit has been pressed for about 5 seconds, the
display on the main unit disappears and it returns to the status before
the setup mode was entered.
The display on the GRC disappears if no key on the GRC has been
pressed for about 10 seconds.
Ambience effects
C-V750 (En/T)
Setup Sound
Test Tone DSP
Delay Time
Tone/
Balance
Speaker Level
Input Level -6dB
(The displayed icons are variable depending
on the model.)
Position of the right speaker
·