Tad Operation; Selecting The Outgoing Message; Recording/Deleting An Outgoing Message; Setting The Record Time - Radio Shack TAD-734 Owner's Manual

43-734.fm Page 24 Thursday, February 24, 2000 10:42 AM

TAD OPERATION

SELECTING THE
OUTGOING MESSAGE
The TAD has two prerecorded outgoing
messages. One asks the caller to leave
a message: "Hello, no one is available to
take your call. Please leave a message
after the tone." The TAD uses this mes-
sage when is set to
REC TIME

"Setting the Record Time").

The other is simply an announcement
and does not let the caller leave a mes-
sage: "Hello, no one is available to take
your call." The TAD uses this message
when is set to
REC TIME
nouncement only).
You can also record your own message
(see "Recording/Deleting an Outgoing
Message"). When you record your own
outgoing message, the TAD uses it for
all settings.
REC TIME
To switch between your outgoing mes-
sage and the TAD's prerecorded mes-
sage, press . When the current
OGM
message begins to play, press
again. The TAD switches to the other
message and plays it.
RECORDING/DELETING
AN OUTGOING MESSAGE
24
To record your outgoing message (up to
30 seconds long), hold down
the TAD beeps and
you finish your message, press
or
STOP
message.
To delete your outgoing message and
use the TAD's prerecorded messages,
or (see
1 4
hold down
Then press
onds.
SETTING THE RECORD
TIME
(an-
ANN
Set
REC TIME
mine how the TAD-734 will record in-
coming messages.
OGM
— The TAD plays the outgoing mes-
1
sage and lets callers leave a message
up to 1 minute long.
— The TAD plays the outgoing mes-
4
sage and lets callers leave a message
up to 4 minutes long.
(announcement only) — The TAD
ANN
plays the outgoing message but does
not let callers leave a message.
OGM
flashes. When
--
. The TAD plays back your
OGM
OGM until the TAD beeps.
OGM again within two sec-
to , , or
1 4 ANN
until
PLAY/
to deter-