Forced Operation - LG LS-E0960CL Service Manual

11. Forced Operation

• If you lose wireless remote controller, you can operate the unit with forced operation switch.
• The standard conditions are as following.
Operation Mode
FAN Speed
Setting Temp
Open the front
panel upward
12. AUTO RESTART
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
procedures automatically to the previous operating conditions.
In case the air conditioner does not receive any signal from the remote control, it will turn off automatically after
7 hours.
If you want to use this operation, Open the front panel upward and move the slide switch to the Auto Restart
position.
If you do not want to use this operation, move the Slide Switch to the Remote control position.
Room Temp 24°C 24°C > Room Temp 21°C
Cooling
High
22°C
Slide Switch
-20-
Soft Dry
Low
23°C
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL
• When you are out for a while, move the
Slide switch to the REMOTE CONTROL.
Room Temp<21°C
Heating
High
24°C