Using The Flash Feature; Making Conference Calls - Panasonic KEY TELEPHONE User Manual

6. Using Additional Features
Note: This feature requires system programming and addition hardware (VB-44224
Telephone and VM-44101 Voice Recognition Adaptor). For more information, see
your system administrator or ICX dealer.

USING THE FLASH FEATURE

You can send a signal to your phone to release an outside line by pressing the FL/R
key or the PROG key. Once you press either key, your phone will either reseize the
same outside line or switch to extension dial tone status.
Note: This feature requires system programming. For more information, see your
system administrator or ICX dealer.

MAKING CONFERENCE CALLS

You can use your phone to create conference calls that include up to three parties.
(With the installation of an optional 8-party conference card, you can include up to
eight parties.)
Notes:
• 3-party conferencing supports the following combinations of parties:
• 3 extensions
• 2 extensions and 1 outside line
• 1 extension and 2 outside lines
• 8-party conferencing supports the following combinations of parties:
• 8 extensions
• 7 extensions and 1 outside line
To establish a three-party conference call
1. While on a call, press the HOLD key or the outside line key you are using.
2. Access an outside line or dial the number of the extension you want to add to the
call.
3. If you accessed an outside line, dial the number of the party you want to add to
the call. Otherwise, proceed to step 4.
4. Press the CONF key when your call is answered. (You are connected to the
called party.)
5. To add another party repeat steps 1-4.
58 Key Telephone User Guide