Table of Contents
Advertisement
8.4 Automatic programmes
with weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1.
Activate the appliance.
2.
Touch
3.
Touch
programme (refer to the "Recipe
book").
The display shows: the cooking time,
the duration symbol
weight, a unit of measurement (kg,
g).
4.
Touch
matically after five seconds.
5.
The appliance activates. A symbol of
the weight unit flashes in the display.
During this time you can change the
default weight value with
Touch
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes. The appliance deactivates.
7.
Touch a sensor field or open the
door to stop the acoustic signal.
8.5 Automatic programmes
with the core temperature
sensor
The core temperature of the food is de-
fault and fixed in programmes which use
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to set:
• The oven temperature: refer to the ta-
ble for roasting in the recipe book.
.
or
to set the weight
, a default
or the settings save auto-
or
.
the core temperature sensor. The pro-
gramme ends when the appliance is at
the set core temperature.
1.
Activate the appliance.
2.
Touch
again and again until the
display shows
3.
Install the core temperature sensor
(refer to "The core temperature sen-
sor").
4.
Touch
temperature sensor programmes.
When a core temperature sensor
programme is set, the display shows
the cooking time,
5.
Touch
matically after five seconds.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
.
The appliance deactivates.
7.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
• The core temperature: refer to the ta-
ble for the core temperature sensor in
the recipe book.
Only use the core temperature
sensor supplied or the correct re-
placement parts.
1.
Activate the appliance.
2.
Put the tip of the core temperature
sensor (with
the centre of the meat.
ENGLISH
.
or
to see the core
and
or the settings save auto-
on the handle) into
15
.
Advertisement
Table of Contents
