Technical Data - AEG BE7314401M User Manual

38 www.aeg.com
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows an er-
ror code that is not in
this list.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. TECHNICAL DATA

Voltage
Frequency
15. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
Problem
. Put the packaging in
Possible cause
The automatic cut-out is
activated.
The fuse is released.
The lamp is defective.
There is an electrical
fault.
on the front frame of the appliance cavi-
ty.
220 - 240 V
50 Hz
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
Remedy
Refer to "Automatic
switch-off".
Make sure that the fuse
is the cause of the mal-
function. If the fuse re-
leases again and again,
contact a qualified elec-
trician.
Replace the lamp.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
the error code again,
contact the Service
Center.
.........................................
.........................................
.........................................