Table of Contents
Advertisement
16 www.aeg.com
3.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance. The display shows
perature. The temperature is 60 °C
for the first operation, and the last
set value for each subsequent oper-
ation.
4.
Touch
temperature.
5.
Touch
matically after 5 seconds.
Useful information:
You can set the core temperature
only when
the display but does not flash before
you set the core temperature, touch
ue.
6.
Set the oven function and, if neces-
sary, the oven temperature.
The display shows the current core
temperature and the temperature
bar, which shows the relation be-
tween the set oven temperature and
the current oven temperature.
Useful information:
The core temperature sensor must
stay in the meat and in the socket
during the cooking.
While the appliance calculates the
approximate duration time, the val-
and the default set core tem-
or
to set the core
or the settings save auto-
flashes. If
and
or
to set a new val-
ue of the Count Up Timer function
shows in the Timer / residual heat
display. When the first calculation
ends, the Timer / residual heat dis-
play shows - and then the approxi-
mate duration of the cooking. The
appliance continues to calculate the
duration during the cooking. The
display updates at intervals with the
new duration value.
7.
When the meat is at the set core
temperature, the core temperature
and
sounds for two minutes. Touch a
sensor field to deactivate the acous-
tic signal.
8.
Remove the core temperature sen-
sor from the socket and remove the
meat from the appliance.
WARNING!
Be careful when you remove the
core temperature sensor. It is
hot. There is a risk of burns.
9.
Deactivate the appliance.
When you put the core tempera-
ture sensor into the socket, you
cancel the settings for the clock
functions.
When you cook with the core tempera-
ture sensor, you can change the temper-
is in
ature shown in the Temperature / Time
display. After you put the core tempera-
ture sensor in the socket and set an oven
function and temperature, the display
shows the current core temperature.
Touch
three other temperatures:
• The set core temperature
• The current oven temperature
• The current core temperature.
The set core temperature changes into
the current core temperature and the
current oven temperature changes into
the set oven temperature.
flash. An acoustic signal
again and again to see
Advertisement
Table of Contents
