Gateway 995 User Manual page 142

Chapter 6: Troubleshooting
Code
0B52:
0B53:
0B5F:
0B60:
0B61:
0B62:
0B6F:
0B70:
0B71:
0B74:
0B75:
0B7C:
0B80:
0B81:
0B82:
136
Error message
Processor 3 with error
taken offline
Processor 4 with error
taken offline
Forced to use CPU with
error
DIMM bank 1 has been
disabled
DIMM bank 2 has been
disabled
DIMM bank 3 has been
disabled
DIMM bank with error is
enabled
The error occurred
during temperature
sensor reading
System temperature out
of the range
The error occurred
during voltage sensor
reading
System voltage out of
the range
The error occurred
during redundant power
module confirmation
BMC Memory Test
Failed
BMC Firmware Code
Area CRC check failed
BMC core Hardware
failure
www.gateway.com
Failure description
Failed Processor 3, error detected
Failed Processor 4,n error detected
An error detected in the entire CPU
Memory error, memory bank 1 failed
Memory error, memory bank 2 failed
Memory error, memory bank 3 failed
An error detected in all the memory
Error while detecting a temperature
failure
Temperature error detected
Error while detecting voltage
System voltage error
The error occurred while retrieving the
power information
BMC device (chip) failed
BMC device(chip) failed
BMC device(chip) failed