Service Information; Wiring Diagram - Lever Models - Follett 25 Installation, Operation And Service Manual

Service information

Wiring diagrams
How unit works — lever models
The dispense wheel motor is energized through the power and ice dispense switches. The water solenoid valve is
energized through the power and water dispense switches. The ice machine receives the bin signal through the power
switch, the normally closed bin thermostat and the ice machine switch. When the bin level thermostat is calling for ice, a
115v bin signal is applied to the bin signal terminals on the ice machine circuit board. When ice builds up around the bin
thermostat, the contacts open, cutting the bin signal to the ice machine.
dispenser power
18
4x4 junction box
located behind splash panel
switch
t-stat
red
ice switch
purple
water switch
blue
ice machine
power
(120 VAC)
ice machine
bin signal
(120 VAC)
bin signal
switch
red
purple
blue
115VAC
60hz
white
white
white
white
M
wheel motor
white
WTR
water solenoid valve
25CT/HT/CR/HR/FB and 50CT/HT/CR/HR/FB