Installing A Memory Card - Honeywell Dolphin 9900 User Manual

Installing a Memory Card

1. Press Blue + Backlight key to put the terminal in suspend mode; see
2. Remove the battery.
3. Place the terminal on a flat, secure surface with the keyboard face-down.
4. Unscrew both screws and remove the door.
5. Slide the mini-SD card into the appropriate slot until it clicks into place.
a. To remove an installed mini-SD card, tap on the edge lightly to unlock the card; the card will pop
out just enough for you to grab its edge and pull it out.
6. Replace the access door and tighten the screws.
There is a rubber gasket on the inside of access door that must be in place when you seal the door.
This gasket performs the sealing action for the door.
Dolphin® 9900 Mobile Computer User's
Guide
Rev C
10/30/08
Suspend Mode on page 2-11.
3 - 9