Related Manuals for Honeywell Dolphin 99EXLG Series
Summary of Contents for Honeywell Dolphin 99EXLG Series
- Page 1 ™ Dolphin 99EX Mobile Computers for Use in Hazardous Locations Dolphin 99EXLGX-XXXXXXXI Dolphin 99EXLWX-XXXXXXXI Dolphin 99EXL0X-XXXXXXXI ® with Windows Embedded Handheld 6.5 Quick Start Guide...
- Page 2 Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Honeywell to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
- Page 3 11.3 watt hour) and extended battery pack, part number 99EX-BTEC-2 (Li-ion 3.7V, 18.5 watt hour), manufactured for Honeywell International Inc. Note: Dolphin 99EX models intended for use in hazardous locations are identifiable by specific labeling located on the back panel of...
- Page 4 Note: Replace only with battery pack model 99EX-BTSC (PN 99EX- BTSC-2) or 99EX-BTEC (PN 99EX-BTEC-2), manufactured for Honeywell International Inc. CAUTION - DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
- Page 5 Warning: Explosion Hazard. Do not use external connectors in areas known to be hazardous. Warning: Explosion Hazard. Do not use the terminal in areas known to be hazardous if the I/O cover is damaged, missing or not properly installed (e.g., missing M2 screws). Warning: Explosion Hazard.
-
Page 6: Front Panel
Front Panel Note: Your Dolphin model may differ from the models illustrated; however, the features are standard for all 99EX models unless otherwise indicated. Charge Indicator LED Touch Panel Display Front Speaker General Scan Key Notification Navigation Keys Power Key Volume Button Right Button... -
Page 7: Back Panel
Back Panel Battery Door Release Battery Door Hand Strap Hand Strap Hook IRDA Port Stylus Left Button Slot Image/Scan Engine Window Rear Speaker Color Camera Flashlight/ Camera Flash... -
Page 8: Available Keyboards
Available Keyboards 34-Key Alpha/Numeric Keyboard SEND SCAN ☼ A B C D E F G H I J K L 34-Key Numeric (Calculator) Keyboard PQRS T U V WXYZ SEND SCAN ☼ BKSP — A B C D E F ALPHA CTRL G H I... - Page 9 43-Key Alpha/Numeric Keyboard SEND SCAN ☼ 55-Key Full Alpha/ Numeric Keyboard BKSP SCAN ☼ CTRL BKSP & — ‘ CTRL...
-
Page 10: Install The Main Battery Pack
Install the Main Battery Pack The 99EX is shipped with the battery packaged separate from the terminal. Follow the steps below to install the main battery. For information on how to remove the battery, see page Before you attempt to use, charge, or replace the battery in the terminal, carefully read all the information under Equipment for Use in Hazardous Locations (see page 1). -
Page 11: Battery Error Notification
6. Connect the terminal to one of the 99EX series charging peripherals to charge the main battery pack. We recommend use of Honeywell Li-poly or Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. -
Page 12: Battery Pack Use And Disposal
• Improper battery use may result in a fire, explosion or other hazard. • We recommend use of Honeywell Li-poly or Li-ion battery packs. Use of any non-Honeywell battery may pose a personal hazard to the user. • Only use the battery for the system for which it is specified. - Page 13 Do not allow metallic conductive objects to contact battery terminals. • If you observe that the Honeywell battery supplied is physically damaged, please send it to Honeywell International Inc. or an authorized service center for inspection. Refer to Technical Assistance on page 29.
-
Page 14: Suspend Mode
Suspend Mode The terminal goes into Suspend Mode automatically when the terminal is inactive for a programmed period of time. You can program this time on the Advance tab of the Power System Setting. For additional information, refer to the Dolphin 99EX Mobile Computers for Use in Hazardous Locations User’s Guide located on the Web at www.honeywellaidc.com. -
Page 15: Charging The Dolphin Terminal
24 hours prior to initial use to ensure the internal backup battery is fully charged. We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by... - Page 16 “Equipment for Use in Hazardous Locations” on page Use only a UL Listed power supply, which has been qualified by Honeywell with output rated at 12VDC, and 3 amps with the device. Front Panel Power/Dock COMM LED...
- Page 17 Charge the auxiliary battery in a cooler environment or replace the battery with a new Honeywell battery (PN 99EX-BTEC-2 or 99EX-BTSC-2). Serial Port Communication Serial data is being sent from the host device to the base.
-
Page 18: Charging/Communication Cables
99EX-DEX, 99EX-RS232, 99EX-USB, 99EX-USBH) are not designed for use in hazardous locations. Use only a UL Listed power supply, which has been qualified by Honeywell with output rated at 5VDC and 3 amps with the device. Plug Adapter Dolphin 99EX... -
Page 19: Led Indicators
Device LED Indicators There are two light emitting diodes (LEDs) located to the left and right of the Honeywell logo above the LCD display. The General Notification LED (right) flashes and illuminates during resets, scanning/imaging and taking a picture. This LED can be programmed by various software applications. -
Page 20: Battery Status Indicator
The battery has a very low charge. Charge the battery. A battery error has occurred. Replace the main battery pack with a new Honeywell battery pack. Before you attempt to use, charge, or replace the battery in the terminal, carefully read all the information under “Equipment for... -
Page 21: Software Upgrades
For additional information on ActiveSync or Windows Mobile Device Center visit www.microsoft.com. We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. -
Page 22: Installing A Memory Card
Hazardous Locations” on page 1 before you attempt to install a card. Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with Dolphin terminals for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. - Page 23 8. Lift the door up to expose the socket. Step 8 9. Slide the microSD or microSDHC card into the door of the socket. Note: Make sure the interface on the memory card is connected to the interface in the socket; align the notch on the card with the notch of the socket.
-
Page 24: Installing A Sim Card
Installing a SIM Card Carefully read all the information under “Equipment for Use before you attempt to in Hazardous Locations” on page 1 install a card 1. Press the Power key to put the terminal in Suspend Mode. Step 5 2. - Page 25 9. Insert the SIM card into the socket. Step 9 Note: Make sure the interface on the card is connected to the SIM Card interface in the socket; align the beveled corner of the card with the beveled corner of the socket.
-
Page 26: Using The Scan Image Engine
Using the Scan Image Engine 1. Tap > Demos > Scan Demo 2. Point the Dolphin terminal at the bar code. 3. Project the aiming beam or pattern by pressing and holding one of the following: • the SCAN key (all models) or •... -
Page 27: Aiming Options
Aiming Options N5603 Red High-Vis Aiming Pattern N5600 Green Aiming Beam Linear Bar Code 2D Matrix Symbol... -
Page 28: Using The Color Camera
Using the Color Camera 1. Tap > Demos > Camera Demo 2. Adjust the camera settings using the menu at the top of the display screen. 3. Point the terminal's camera Camera Camera lens at the object you want Lens Flash to capture. -
Page 29: Soft Reset (Warm Boot)
2. The decode and scan LEDs light for approximately 3 seconds. 3. The terminal re-initializes. Factory Reset Contact a Honeywell technical support representative for information on how to perform a factory reset. For contact information, see Technical Assistance on page 30. - Page 30 Equipment for Use in Potentially Explosive Atmospheres The following information is relevant for Dolphin 99EX models intended for use in hazardous locations (99EXXXX-XXXXXXXI). Note: Terminals intended for use in hazardous locations are identifiable by specific labeling located on the back panel of the device, see page 5 for label locations.
- Page 31 International IEC IEC 60079-0:2011, IEC 60079-11:2011 Europe EN 60079-0:2012, EN 60079-11:2012 ATEX Directive This product conforms with the requirement of ATEX directive. The ATEX Directive 94/9/EC is a European CE Mark directive concerning products that are designed for use in potentially explosive environments. II 3 G D Ex ic IIC T6 Gc Ex ic IIIB T88°C Dc...
-
Page 32: Technical Assistance
Equipment Suitable for Dust Zone 22 Tamb Ambient Temperature Technical Assistance Contact information for technical support, product service, and repair can be found at www.honeywellaidc.com. User Documentation Refer to www.honeywellaidc.com for detailed user documentation or for localized versions of this Quick Start. Limited Warranty Refer to www.honeywellaidc.com/warranty_information... - Page 36 Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 99EXEI-QS Rev D 5/13...