Verifying Data Transfer - Honeywell Dolphin 9900 User Manual

1. Insert the Dolphin terminal into the terminal well of the base.
• The DOCK LED illuminates green. If the DOCK LED does not illuminate, make sure that the terminal is
properly seated. You may need to remove and re-insert the terminal.
• The Dolphin terminal activates; if the power is off, the terminal automatically powers on. If the terminal does
not power on, verify that the Honeywell power supply is properly connected to the cradle and plugged into a
functioning outlet.
• If the base is connected to the workstation, the Dolphin terminal automatically opens ActiveSync to establish
a connection.
2. The base can now transfer data between the terminal and the host device. If communication does
not occur, check the port connections to ensure that the cradle is correctly configured.
Verifying Communication
You can verify that the USB driver is functioning by watching the COMM LED on the USB base. When
the COMM LED illuminates solid green, the base is communicating with the host device.

Verifying Data Transfer

The COMM LED flashes when data is being transferred via the base. For an RS-232 connection, the
COMM LED flashes red and green. For a USB connection, the COMM LED flashes green.
11 - 8 Rev C
10/30/08
Dolphin® 9900 Mobile Computer
User's Guide