Sending And Receiving Non-Verbal Messages; Lighting The Message-Waiting Light - Comdial DXP Series User Manual

Dxp, dxp plus, and fx series digital communications system proprietary single line telephone (slps) station

Hide thumbs Also See for DXP Series:

Table of Contents

GCA70–251

Sending And Receiving

Non-Verbal Messages

8.1

To turn on the message-waiting light (and a broken dial tone)

at an idle telephone,

1. Lift handset and listen for intercom dial tone.

2. Dial

3. Dial extension number of station to be alerted. The

message-waiting light of called station will flash. The

message-waiting light can only be turned off by either the

person sending the message or the person receiving the

message.

To turn off the message-waiting light at a busy or idle station,

1. Lift handset and listen for intercom dial tone.

2. Dial

3. Dial extension number of station that was alerted. The

message-waiting light of called station will turn off.

To turn off the message-waiting light at a station during a

conversation with a party at that station,

1. Press INTERCOM.

NOTE: The message waiting light can only be turned off by the person

sending the message or the person receiving the message.

Single Line Telephone Station User's Guide 8 – 1

Sending And Receiving Non-Verbal Messages

Table of Contents