Setting Your Personal Ringing Tones; Setting Your Ring Volume - Comdial DXP Series User Manual

GCA70–251
If you receive a parked call message on your Tracker pager,
1. Go to any system station.
2. Lift handset and listen for intercom dial tone.
3. Dial the orbit code (#800–#899) displayed on your pager.
4. Retrieve call.
To enable or disable a Tracker pager at your station,
1. Lift handset and listen for intercom dial tone.
2. Dial # 06 to disable,
—OR—
dial # 07 to enable.
3. Hang up handset.
7.6

Setting Your Personal Ringing Tones

To alter the ring tone of your telephone so you can distinguish
its ringing from that of others located close by,
1. Lift handset and listen for intercom dial tone.
2. Dial 4.
3. Dial number (1–8) to select ring tone.
4. Hang up handset.
7.7

Setting Your Ring Volume

To set the ring volume,
8101N: Locate the switch on the bottom of the telephone and set it
to either High or Low.
8201N: Adjust the volume control on the front of the telephone to
Hi, Mid, Low, or Off (this control does not affect the handset
volume).
Using The Other Telephone Features
Single Line Station User's Guide 7 – 5