Switching Between Pulse And Tone; Forwarding Calls - Comdial DXP Series User Manual

Using The Other Telephone Features
At times other telephone users may page you with instructions to meet
them on line. This is known as a meet-me page. You can go to the nearest
telephone, dial a code, and be in contact with the paging party.
To reply to a meet-me page,
1. Lift handset of nearest telephone and listen for intercom dial
tone.
2. Dial 78.
3. Meet paging party on line.
7.3

Switching Between Pulse And Tone

If the local telephone service is pulse (for rotary dialing), you
can convert to tone while dialing as follows:
1. Press # at point in dialing sequence where conversion to tone is
required.
NOTE: You can store pulse/tone switching along with your speed dial
number codes by pressing # during the number storage.
7.4

Forwarding Calls

To forward your calls to another telephone,
1. Lift handset and listen for intercom dial tone.
2. Dial forwarding code:
52 = all calls forward immediately,
54 = all calls forward after busy or no answer,
51 = prime line and personal intercom calls forward
immediately,
53 = prime line and personal intercom calls forward on busy
or no answer.
3. Dial extension number of telephone to receive your forwarded
calls.
4. Hang up handset.
7 – 2 Single Line Station User's Guide
GCA70–251