Table of Contents
Advertisement
91-000197-020-000_E5925B_R0.qxd
Volume
Flash
PHONE
00:00:12
MICROPHONE MUTED
MUTE
Tone
2/13/1950
Telephone Operation
Options while on calls
Volume control
Press the
VOLUME
to adjust listening volume. Each button press raises or
lowers volume by one level.
When you change the volume level, the new setting
becomes the default. The new volume level will be
applied each time you use the handset, speakerphone
or headset.
Call waiting
If you have Call Waiting service, you will hear a beep if
someone calls while you are already on a call. Press
to put your current call on hold and take the new
FLASH
call. You can press
and forth between calls.
3-way conference calls
During an outside call, you can use two system handsets
for a three-way conversation.
While a call is in progress, others can press
to join the conference call. Others can press
SPEAKER
or place the handset in the base or charger to drop
OFF
out of the conference call, but the call will not be termi-
nated until all handsets hang up.
Mute
Press
MUTE
to hear, but your caller will not be able to hear you
until you press
Ring silencing
Press
or
OFF
the ringer.
Off
Temporary tone dialing
If you have dial pulse (rotary) service, you can switch to
touch tone dialing during a call by pressing
can be useful if you need to send tone signals for access
to answering systems or long-distance services.
Mute
7:21 PM
Page 11
buttons on the side of the handset
at any time to switch back
FLASH
to silence the microphone. You will be able
again and resume speaking.
MUTE
while the phone is ringing to silence
MUTE
11
or
PHONE
*
. This
Advertisement
Table of Contents
