Table of Contents
Advertisement
2230_book_1ATT
5/10/01
4
Use the keypad to enter a volume setting (0 – 6)
— OR —
Press < or > to display desired setting.
Press S to save displayed setting.
5
Ring Pattern
The external ring pattern sets which ringer you hear when you have an
outside call. The internal ring pattern sets which ringer you hear when you
have an intercom call from the other handset. External ring pattern default
setting is 0; internal ring pattern default setting is 1.
Press S.
1
Press 4. The screen displays
2
Press S.
3
Press > then S to set EXT RING PATTERN or INT RING
4
PATTERN.
5
Use the keypad to enter a ring pattern selection (0 – 9)
— OR —
Press < or > to display desired setting. A sample of the displayed
setting is played briefly.
Press S to save displayed setting.
6
Auto Answer
When this feature is on, an incoming call is connected when you lift the
handset from the base or the charger (you don't have to press P). If
the handset is not in the base or charger, you do have to press P to
answer a call, regardless of the setting. The default setting is OFF.
Press S.
1
Press 5. The screen displays
2
3
Press < to turn ON.
— OR —
Press > to turn OFF.
Press S to save the displayed setting.
4
8:25 PM
Page 7
FEATURE SETUP
>RING PATTERN
AUTO ANSWER
>AUTO ANSWER
KEY CLICK
7
Advertisement
Table of Contents
