Ring Volume; Ring Pattern - AT&T 2255 User Manual

FEATURE SETUP

Ring Volume

Adjust the volume of the handset ringer. Setting volume to 0 turns the
ringer off. Default setting is 3.
Press S.
1
2
Press < until the screen displays
Press S. The screen displays
3
4 Use the keypad to enter a volume setting (0 – 6)
— OR —
Press < or > to hear ring volumes.
Press S to save desired setting.
5

Ring Pattern

The external ring pattern sets which ringer you hear when you have an
outside call. The internal ring pattern sets which ringer you hear when you
have an intercom call from the other handset. External ring pattern default
setting is 0; internal ring pattern default setting is 1.
Press S.
1
2
Press < until the screen displays
Press S.
3
Press > then S to set EXTERNAL
4
or INTERNAL.
5 Use the keypad to enter a ring pattern selection (0 – 9)
— OR —
Press < or > to display desired setting. A sample of the displayed
setting is played briefly.
Press S to save displayed setting. You will hear a
6
confirmation tone.
7
Press to exit ring pattern setup.
6
>RING VOLUME
RING PATTERN
>RING VOLUME
>RING PATTERN
AUTO ANSWER
EXTERNAL
INTERNAL