Camera Setup
Auto Exposure
Document 800-07067V4 Rev A
11/2011
®
HCD5 EQUIP
Series True Day/Night Network Box Camera Reference Guide
Deselecting the check box disables the refresh rate.
Note
The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
The Camera Setup view provides access to the settings used to configure the camera
configurations for both Primary and Secondary streams. The following section explains
Auto Exposure and White Balance setup.
Note
You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Figure 4-11
Camera Setup
The Auto Exposure settings allow the user to access and configure exposure-related
settings as described in
Table
4-5.
51