Table of Contents
Advertisement
Interfacing with the EQUIP PSIA Device Via a Network Video Recorder
Step 5: Launch the Web Client to View Live Video
Document 800-07067V4 Rev A
11/2011
®
HCD5 EQUIP
Series True Day/Night Network Box Camera Reference Guide
This camera supports the PSIA specification for interoperability between network video
products. There is no support for legacy EQUIP and EQUIP2 protocols.
For further information, refer to the documentation supplied with your NVR or contact your
NVR network administrator.
Note
After the IP Utility software is installed for the first time, you can change the
Administrator or Guest passwords and upgrade firmware.
Note
It is important to click Apply in order to save any configuration change.
1.
Log onto the web client. There are two ways to launch the web client and log on— via
the Honeywell IP Utility Program or directly from Internet Explorer.
Honeywell IP Utility
a.
Log onto the Honeywell IP Utility program.
b.
From the Discovery pane, click to select the device to launch its browser.
c.
To enable or disable the HTTP server, select or clear the Enable HTTP Server
check box. By default, the HTTP server is enabled.
d.
From the System tab, click Launch Browser.
The web client application for the selected device opens in Internet Explorer.
Internet Explorer
From Internet Explorer (v6.0+), enter the URL (IP address of the device) in the
Address bar to open the logon window.
2.
Select a User Name and enter a Password.
a.
From the User Name drop-down list, select admin or guest.
b.
In the Password field, enter the case-sensitive password.
•
The default Administrator password is 1234.
•
The default Guest password is guest.
c.
Click
.
35
Advertisement
Table of Contents
