Installing the Honeywell IP Utility and Web
Client Software
About the Honeywell IP Utility and Web Client
About the Honeywell IP Utility
Document 800-07067V4 Rev A
11/2011
This chapter describes how to:
•
Install and log onto the IP Utility
•
Connect to a device and configure network settings using the IP Utility
•
Launch the web client software
•
Uninstall the IP Utility, Bonjour, or ActiveX software
•
Perform firmware upgrades
The Honeywell IP Utility is a software application that is installed from a DVD or
downloaded from the Honeywell Systems Group website (www.honeywellvideo.com). It
is installed on a local workstation and primarily used by Administrators to configure the
®
EQUIP
Series of products residing on an IP network.
The IP Utility enables users to:
•
Discover device(s) on a network
•
Configure the IP network settings, name device(s), upgrade firmware, change
passwords.
•
Open individual web client applications for each discovered device.
Note
Before installing and using the Honeywell IP Utility, confirm that your camera
is connected to the network through an Ethernet cable (see
Ethernet Connection
on page 21).
3
Network RJ-45
25