Table of Contents
Advertisement
Refresh button
Disconnect button
The Discovery pane lists
the IP devices found on the
network and groups by
device type.
Enable or disable HTTP
Server.
Use Batch Firmware Upgrade
to select a group of devices and
upgrade the firmware for all.
Step 4: Connect to a Device and Configure Network Settings
Document 800-07067V4 Rev A
11/2011
®
HCD5 EQUIP
Series True Day/Night Network Box Camera Reference Guide
Figure 3-3
Honeywell IP Utility User Interface
Connect button
Limited/No connectivity
button
The Status bar displays how many
devices are on the network, which
one you are connected to, and
which user is logged on.
When you log on to the IP Utility, the devices on the network — including the devices on
other subnets — are automatically discovered and are listed in the Discovery pane. After
the initial discovery, auto-refresh continues to discover devices that are newly added to the
network.
Use the Product Filter drop-down
menu to select a specific device,
HCD5 series
such as all
cameras.
The About menu displays the
software version installed.
On the User tab, Administrators
can change the web client user
passwords.
IP Network Setting assigns
network settings automatically
or manually.
Upgrade Firmware
downloaded from the
Honeywell website.
Use Launch Browser
to open the HCD5
series IP web client for
each device.
Click Apply to save
manually configured
network settings.
31
Advertisement
Table of Contents
