Table of Contents
Advertisement
Revisions
Issue
Date
V2 A
11/2011
V3 A
11/2011
V4 A
11/2011
4
Revisions
Changed 800-07067V1from a User Guide exclusively for HCD5MIH/X. Added the
HCD5HDIH(X) and HCD5MWIH(X) cameras to this User Guide.
Added a note in Chapter 2 advising that the camera should not be connected to two
different power sources at the same. Changed the number of users that can be
logged on at the same time. Changed the length of time required to hold down the
reset button. Added a note in the IP installation section suggesting that all Norton
AntiVirus software be disabled before installing the IP software.
Added the information for installing the Honeywell IP Utility on Windows 7. And added
Frame Rate to the list of available priority settings in the Compression Settings
section.
Removed sentence in Specifications which states that only 4 users can log on at a
time. Removed notes throughout that referred to a limited number of users that can
be logged on at a time. Updated the System Requirements. Added the step for
Enabling Microsoft .NET Framework 3.5 to the Install Honeywell IP Utility Software
section. Expanded on the Disable User Account Control section. Added WDR and
LDC to the Auto Exposure Settings table. Changed the Immunity Regulatory
specification from EN 50024 to 50130-4.
Corrected the description of the Alarm I/O and Audio I/O connectors in the
specifications for HCD5MIH(X) and HCD5WIH(X).
Advertisement
Table of Contents
