Table of Contents
Advertisement
Configuring Video Motion Detection
Document 800-07067V4 Rev A
11/2011
®
HCD5 EQUIP
Series True Day/Night Network Box Camera Reference Guide
Configuring Camera Field of View Change Detection
The web client application can detect tampering of the camera field of view and show an
alarm message above the video display (see
camera field of view:
1.
Click the Video Analytics tab.
2.
In the Scene Change Threshold list, select one of the following options:
Table 4-9
Scene Change Threshold Values
Value
High (80%)
Medium (50%)
Low (30%)
3.
Click Apply.
Note
To turn off camera field of view change detection, select Disable in the Scene
Change Threshold list. Disable is the default value.
Note
You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
For motion detection, an Administrator can enable and configure up to 5 zones within a
scene. The enabled and configured zones will be monitored for motion.
1.
Click the Region drop-down menu, then select a region from the five available.
2.
Click the VMD drop-down arrow, and select Enable.
The Regions appear in their default positions.
3.
Click Apply.
Figure
4-14). To detect a change in the
To detect ...
Maximum change in the camera field of view. The alarm
message appears when tampering causes at least an 80%
change in your camera field of view.
Medium change in the camera field of view. The alarm
message appears when tampering causes at least a 50%
change in your camera field of view.
Minimum change in the camera field of view. The alarm
message appears when tampering causes at least a 30%
change in your camera field of view.
57
Advertisement
Table of Contents
