Alarm and Audio
Alarm Settings
Audio Settings
Document 800-07067V4 Rev A
11/2011
®
HCD5 EQUIP
Series True Day/Night Network Box Camera Reference Guide
Figure 4-16
Audio and IO Settings Tab
Connect external devices such as sirens or flashing lights to the alarm output connector to
signal camera users that an alarm is activated. Set the Alarm Output as Normally Open or
Normally Close. See
Connecting Alarms
When alarm inputs are connected, the camera triggers an alarm only when the normal state
(open or closed) changes. An alarm message appears on the web client screen (see
Figure
4-14) to notify the operator.
The network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry-standard line level audio input
and output to the back of your camera. See
information.
Audio configuration for your network camera is straightforward.
on page
23
for more information.
Connecting Audio
on page
24
for more
59