Defining Snmp Communities - Cisco Linksys SFE1000P Reference Manual

– DefaultSuper — Defines the default group access rights for administrator.

Defining SNMP Communities

The Access rights are managed by defining communities in the SNMP Communities Page. When the
community names are changed, access rights are also changed. SNMP communities are defined
only for SNMP v1 and SNMP v2c.
The SNMP Communities Page is divided into the following tables:
• Basic Table
• Advanced Table
The SNMP Communities Basic Table area contains the following fields:
• Management Station — Displays the management station IP address for which the basic
SNMP community is defined.
• Community String — Displays the password used to authenticate the management station to
the device.
• Access Mode — Displays the access rights of the community.
• View Name — Displays the user-defined SNMP view.
The SNMP Communities Advanced Table area contains the following fields:
• Management Station — Displays the management station IP address for which the
Advanced SNMP community is defined.
• Community String — Displays the password used to authenticate the management station to
the device.
Chapter 12: Configuring SNMP
Defining SNMP Communities
SFE1000P Gigabit Ethernet Switch Administration Guide
SNMP Communities Page
Chapter
12
144