Add Snmp Notification Filter - Cisco Linksys SFE1000P Reference Manual

Add SNMP Notification Filter

The Add SNMP Notification Filter Settings Page allows network managers to add filter notifications.
The Add SNMP Notification Filter Page contains the following fields:
• Filter Name — Contains a list of user-defined notification filters.
• New Object Identifier Subtree — Displays the OID for which notifications are sent or
blocked. If a filter is attached to an OID, traps or informs are generated and sent to the trap
recipients. Object IDs are selected from either the Select from List or the Object ID List. there
are two configuration options:
– Select from List — Select the OID from the list provided. Pressing the Up and Down
buttons allows you to change the priority by moving the selected subtree up or down in
the list.
– Object ID — Enter an OID not offered in the Select from List option.
• Filter Type — Indicates whether informs or traps are sent regarding the OID to the trap
recipients.
– Excluded — Restricts sending OID traps or informs.
– Included — Sends OID traps or informs.
Chapter 12: Configuring SNMP
Defining Trap Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Add SNMP Notification Filter Page
Chapter
12
155