Add Martian Address Page - Cisco Linksys SFE1000P Reference Manual

8-port 10/100 ethernet switch with poe
Hide thumbs Also See for Linksys SFE1000P:
Table of Contents

Advertisement

Add Martian Address Page

The Add Martian Addresses Page contains the following fields:
Include Reserved Martian Addresses — Indicates that packets arriving from Martian
addresses are dropped.
The possible values are:
Checked — Includes specially reserved IP addresses in the Martian Address list. When
enabled, the following IP addresses are included:
0.0.0.0/8 (except 0.0.0.0/32), 127.0.0.0/8
192.0.2.0/24, 224.0.0.0/4
240.0.0.0/4 (except 255.255.255.255/32)
Unchecked — Does not include specially reserved IP addresses in the Martian Address
list.
IP Address — Enter the Martian IP addresses for which DoS attack is enabled. The possible
values are:
One of the addresses in the known Martian IP address list. If the Include Reserved
Martian Addresses option is checked, this list includes reserved Martian Addresses.
New IP Address — Enter an IP Address that is not on the list.
Mask — Enter the Mask for which DoS attack is enabled.
Prefix Length — Defines the IP route prefix for the destination IP.
Chapter 5: Configuring Device Security
Defining DoS Prevention
SFE1000P Gigabit Ethernet Switch Reference Guide
Add Martian Addresses Page
Chapter
5
69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sfe1000p

Table of Contents