Resetting Rmon Statistics Counters - Cisco Linksys SFE1000P Reference Manual

– No Refresh — Indicates that the RMON statistics are not refreshed.
• Received Bytes (Octets) — Displays the number of octets received on the interface since the
page was last refreshed. This number includes bad packets and FCS octets, but excludes
framing bits.
• Received Packets — Displays the number of packets received on the interface, including
bad packets, Multicast and broadcast packets, since the page was last refreshed.
• Broadcast Packets Received — Displays the number of good broadcast packets received on
the interface since the page was last refreshed. This number does not include Multicast
packets.
• Multicast Packets Received — Displays the number of good Multicast packets received on
the interface since the page was last refreshed.
• CRC & Align Errors — Displays the number of CRC and Align errors that have occurred on
the interface since the page was last refreshed.
• Undersize Packets — Displays the number of undersized packets (less than 64 octets)
received on the interface since the page was last refreshed.
• Oversize Packets — Displays the number of oversized packets (over 1518 octets) received
on the interface since the page was last refreshed.
• Fragments — Displays the number of fragments (packets with less than 64 octets, excluding
framing bits, but including FCS octets) received on the interface since the page was last
refreshed.
• Jabbers — Displays the total number of received packets that were longer than 1518 octets.
This number excludes frame bits, but includes FCS octets that had either a bad Frame Check
Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-
integral octet (Alignment Error) number. The field range to detect jabbers is between 20 ms
and 150 ms.
• Collisions — Displays the number of collisions received on the interface since the page was
last refreshed.
• Frames of xx Bytes — Number of frames containing the specified number of bytes that were
received on the interface since the page was last refreshed.

Resetting RMON Statistics Counters

To clear the statistics counters, click the Clear Counters button.
Chapter 17: Viewing Statistics
Managing RMON Statistics
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
17
208