Add Protocol Group
The Add Protocol Group Page provides information for configuring new VLAN protocol groups.
The Add Protocol Group Page contains the following fields.
•
Protocol Value — Displays the User-defined protocol value. The options are as follows:
–
Protocol Value — The possible values are IP, IPX, IPv6., or ARP.
–
Ethernet-Based Protocol Value — Specify the value in hexadecimal format.
•
Group ID — Defines the Protocol group ID to which the interface is added. The possible
value range is 1-2147483647 in hexadecimal format.
Modifying Protocol Groups
The Protocol Group Settings Page provides information for configuring existing VLAN protocol
groups.
The Protocol Group Settings Page contains the following fields.
•
Protocol Value — Displays the User-defined protocol value.
•
Group ID (Hex) — Defines the Protocol group ID to which the interface is assigned. The
possible value range is 1-2147483647 in hexadecimal format.
Chapter 7: Configuring VLANs
Defining VLAN Protocol Group
SFE1000P Gigabit Ethernet Switch Administration Guide
Add Protocol Group Page
Protocol Group Settings Page
Chapter
7
93