Cisco Catalyst 3750 Command Reference Manual page 283

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Switch(config-pmap-c)# set dscp 10
Switch(config-pmap-c)# police aggregate agg_policer1
Switch(config-pmap-c)# exit
Switch(config-pmap)# class class3
Switch(config-pmap-c)# trust dscp
Switch(config-pmap-c)# police aggregate agg_policer2
Switch(config-pmap-c)# exit
You can verify your settings by entering the show mls qos aggregate-policer privileged EXEC
command.
Related Commands Command
mls qos aggregate-policer
show mls qos aggregate-policer
78-16181-03
Description
Defines policer parameters, which can be shared by multiple
classes within a policy map.
Displays the quality of service (QoS) aggregate policer
configuration.
Catalyst 3750 Switch Command Reference
police aggregate
2-255