Date & Time Set Procedure; Applying The Cuff - HoMedics BPA-100 User Manual

BPA-100IB_ENGSP.qxd 10/24/05
DATE & TIME SET PROCEDURE
1.To adjust the date/time, press the Set button
located next to the LCD display. The unit will
show a blinking number showing the month.
2.Change the month by pressing the
press will increase the number by one in a cycling
manner. Press the Set button
entry, and the screen will show a blinking number
representing the day of the month.
3.Change the date and time as described in Step 2
above, using the
and the Set button
4. A "0" will reappear as the blood pressure monitor is
ready for measurement again.
repeat process to set date and time
10:51 AM Page 13
button. Each
again to confirm the
button to change the numbers
to confirm the entries.
Press the button
blinking month
increasing month
confirm the entry
13

APPLYING THE CUFF

,
Please see the illustration below for a description of
the arm cuff.
Index
1. Plug the cuff tube into the left side of the unit.
Insert plug here
Tube
OK Range
Indicator Artery Symbol ( )
14