Flush fit hob
42
Flush fit gas hobs are only suitable for installation in
granite, marble, tiled or solid wood worktops. When using
a worktop made from any other material, please check
first with the worktop manufacturer that it is suitable for
installing a flush fit hob.
This appliance requires a 900 mm wide base unit for
installation.
The hob must be accessible from below for servicing
purposes and to ensure that the seal around it is not
dislodged.
The hob may be fitted
– in a suitable cut-out in a granite or marble worktop.
– in a suitable cut-out in a tiled or solid wood worktop with a
wooden support frame. The frame must be provided on
site, and is not supplied with the appliance.