Miele KM 2312 Operating And Installation Instructions page 32

Problem solving guide
Problem
The gas flame goes out
after ignition
The flame pattern has
changed
The flame goes out during
operation
The ignitor on the burner
does not spark.
32
Possible cause
The flames are not
touching the ignition
safety device, it is not
hot enough:
- The burner is not
correctly assembled.
- There is dirt on the
ignition safety
device.
The burner is not
correctly assembled.
The burner head or
burner cap holes are
dirty.
The burner is not
correctly assembled.
Check whether the
mains fuse has
tripped.
- Food residues
between the ignitor
and the burner cap.
- Food residues on the
ignition safety device
Remedy
Assemble the burner correctly.
Remove any soiling.
Assemble the burner correctly.
Remove any soiling.
Assemble the burner correctly.
If it has, contact a qualified electrician or the
Miele Service Department.
Remove any soiling. Please see "Cleaning and
care" for details.