Optional Configuration Features
Displaying Setpoint or Temperature
You can configure the sensor to display either the temperature (default) or setpoint. To select either
option:
1. Verify that the sensor is in operating mode and at the home screen.
2. Press the up and down arrows for 3 seconds. The arrow indicates setpoint display, as shown
Locking or Unlocking Settings
You can lock or unlock the setpoint, system, or fan setting to prevent changes.
To lock or unlock a setting:
1. Verify that the sensor is in operating mode and at the home screen.
2. Choose a setting to lock or unlock:
BAS-SVX10C-EN
in the illustration.
• Select the setpoint by pressing the up or down arrow.
• Select the system menu by pressing the center button. Use the left or right arrow to choose
the setting.
• From the system menu press the down arrow to select the fan menu. Use the left or right
arrow to choose the setting.
Installation and Configuration: Display Sensor
Arrow
indicates
setpoint is
shown on
display
Setpoint
System menu
Fan menu
15