Oki OKIPAGE 14i Service Manual page 327

Service Manual for OKIPAGE 14i Page: 142
Chapter Product Accessory 3: High Capacity 2nd Paper Feeder
3.3.3 Hopping Roller Shaft Assembly and One-way Clutch Gear
(1) Follow up to step (3) of 3.3.1 and remove the hopping frame assy.
(2) Remove the screw (1) and remove the earth plate (2). Remove the sensor lever (7) and remove the ground plate (6). Remove the gear (3) and remove the
metal bush (5) and hopping roller shaft assy (4).
(3) Remove the E-ring (11) and remove the one-way clutch gear (12) on the right side of the feed roller (10).
Note :
The metal bush (13) also comes off. Be careful not to lose it.