Oki OKIPAGE 14i Service Manual page 166

Jam errors
Jam errors
Jam errors
Paper size error
Tray paper out
Size error
Paper Feeder option cover
was opened.
A jam occurred during paper
hopping from the tray.
tray: TRAY1, TRAY2,
FEEDER, MANUAL
A jam occurred during paper
feeding after completion of
paper hopping from the tray.
tray: TRAY1, TRAY2,
FEEDER
A jam occurred during paper
ejecting.
tray: TRAY1, TRAY2,
FEEDER, MANUAL
Paper of improper size is
being fed from the tray.
tray: TRAY1, TRAY2,
FEEDER
The tray has run out of
paper.
tray: TRAY1, TRAY2,
FEEDER
Loading of paper indicated
error display.
- Check the connection between
the main control board and
TQSB-2-PCB.
- Replace the main control board
TQSB-2-PCB or connector.
- Check the paper in the cassette.
Open and then close the cover.
When the cover is closed,
recovery printing is performed and
the error display is released.
- If this error occurs frequently,
see Section 6.5.2(2)-1.
- Open the cover, remove the
paper, then close the cover.
When the cover is closed,
recovery printing is performed and
the error displayed is released.
- If this error occurs frequently,
see Section 6.5.2(2)-2.
- Open the cover, remove the
paper, then close the cover.
When the cover is closed,
recovery printing is performed and
the error display is released.
- If this error occurs frequently,
see Section 6.5.2(2)-3.
- Check the paper in the tray or
check to see if more than one
sheet of paper were being fed
simultaneously.
- Set the designated paper in the
tray.
- Open the cover, then close it to
perform recovery printing and
release the error display.
- If this error occurs frequently,
see Section 6.5.2(2)-3.
Load paper in the tray.
Load the requested paper in the