(6) With the lower base unit standing on its side, remove the one-way clutch gear (1).
(7) Remove the Registration Gear by unlocking the latch of the Gear (4).
(8) Remove the Registration Bearing L (3).
(9) Press the registration roller Assy (2) in the direction of arrow (A) and lift up the left side of it, then remove the registration roller (2) and the bearing
(registration) (3).
(10) Pull out the registration roller Assy (2) in the direction of arrow (B) .
(11) Remove the pressure roller Assy gear (5) by unlocking the latch of the gear (5).
(12) Remove the bearing-RegistrationL (6) and bearing Registration R (7).
(13) Remove the Spring (8) from the bearing (6),(7).