Centronics Parallel Interface - Oki OKIPAGE 14i Service Manual

Centronics Parallel Interface

1) Connector
l
Printer side : 36-pin receptacle (single port) Type 57RE-40360-730B-D29A (made by Daiichi Denshi), CN-AX05841A36AT (made by Ougat) or
equivalent
l
Cable side : 36-pin plug Type 57-30360 (made by Daiichi Denshi) or equivalent Plug-552274-1 (AMP), 552073-1 (AMP) or equivalent
2) Cable
l
Cable length : 6 ft (1.8 m) max. (A Shielded cable composed of twisted pair wires is recommended for noise prevention.)
Note:
Cable is not supplied with the printer, and is not available from Oki.
(3) Table of Parallel I/F Signals
Service Manual for OKIPAGE 14i
Chapter A Centronics Parallel Interface
Page: 96