Oki OKIPAGE 14i Service Manual page 146

4.1.3 Engine Maintenance Mode
Note:
This mode is used only by maintenance personnel, and it should not be released to the end users.
(1) To enter into the engine maintenance mode, turn the power on while holding ENTER and FORM FEED keys down.
(2) Functions of this mode are selected by the menu.
(3) The way to exit out of this mode varies depending on the settings.
(4) There are following engine maintenance modes:
a) Head drive time setting - Sets the drive time of the LED head.
b) 600 x 1200 DPI strobetime relative value.
c) Installed LED head identification.
d) Printing start position setting - Sets the starting position of printing.
e) Drum count total display - The total image drum rotation count of the printer, as counted by the engine section, is displayed on the LCD.
f) Drum count display - The total image drum rotation count, as counted by the engine section, is displayed on the LCD.
g) Standard tray paper feeding quantity setting - Sets the amount of paper to be fed from the standard tray.
h) High Capacity Second Paper Feeder paper feeding quantity setting - Sets the amount of paper to be fed from High Capacity Second Paper Feeder.
i) High Capacity Second Paper Feeder downloading table selection - Selects the downloading table of High Capacity Second Paper Feeder.
j) Power Envelope Feeder paper feeding quantity setting - Sets the amount of paper to be fed from Power Envelope Feeder.
k) Power Envelope Feeder downloading table selection - Selects the downloading table of Power Envelope Feeder.
l) Engine Test
m) Engine Reset - All EEPROM areas used by the engine section are reset to factory default values. (See Table 4-1) After reset, the printer returns to
normal operating mode.
Note:
"Printing start position setting" is for shipping. Do not change its default value.
Detailed descriptions of these functions are provided in Appendix D, DIAGNOSTICS TEST.
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
Service Manual for OKIPAGE 14i
Chapter 4 Adjustments
Page: 55