How To - Life Fitness 95L Service Manual

HOW TO... REPLACE THE MONOCOLUMN
Tool required: Phillips screwdriver, 13mm socket, ratchet
Estimated repair time: 45 minutes
1. Remove the console support cover (See "How To..." on page 79).
2. Remove the console (see "How To..." on page 80).
3. Remove the accessory tray (see "How To..." on page 81).
4. Remove the console support bracket (see "How To..." on page 82).
5. Remove the two Phillips screws that secure the bullhorn covers to the bullhorns and
remove bullhorn covers.
6. Remove the four Torx bolts that secure the handrail assembly to the deadshaft.
7. Remove the three hex bolts that secure the monocolumn to the frame.
8. Carefully lift the
monocolumn out of
the frame and
remove all cables
from the
monocolumn.
9. Slide the
monocolumn boot
cover off
monocolumn.
10. Slide the
monocolumn boot
cover on to the new
monocolumn and
route the Summit
Trainer's cables
through the new
monocolumn before
inserting it into the
frame.
11. Reverse steps 1
through 7 to install
the new
monoolumn.
Console Support Covers
Console
Support
Monocolumn
Mounting
Bolts (2), torque
to 20-30 ft-lbs
(27-41 Nm)
Boot
Cover
Models 95L, 95LWEZ, and 95LE Summit Trainers
Console
Monocolumn
Accessory Tray
Bullhorn Covers

How To...

Handrail
Vertical Uprights
95