How To - Life Fitness 95L Service Manual

Models 95L, 95LWEZ, and 95LE Summit Trainers

How To...

HOW TO... REPLACE THE LOWER BELT
Tools required: Phillips screwdriver, 13mm socket, ½" socket, ratchet
Estimated repair time: 30 minutes
1. Remove the main shroud assembly
(see "How To..." on page 86).
2. Remove the Lower Track Cover
(see "How To..." on page 87).
3. Remove the two hex bolts that
secure one end of the lower belt
to one of the pedal truck
assemblies.
4. Remove the two hex bolts that
secure the other end of the lower
belt to the other pedal truck
assembly.
5. Scribe the position of the tension
bracket before loosening three
tension bracket mounting bolts.
6. Loosen the tensioning bolt until
the tension bracket is as loose as
possible.
7. Install one end of the new lower
belt to one of the pedal truck
assemblies .
8. Route the lower belt around the lower pulley
and attach the other end to the other pedal
truck assembly.
9. Tighten the tensioning bolt until the tension
bracket returns to its original position.
10. Tighten the tension bracket mounting bolts.
11. Reinstall lower track cover.
12. Reinstall the main shrouds.
106
Hex Bolts (2),
torque to
12-14 ft-lbs
(16-19 Nm)
Lower Belt
Belt
Terminator
(detail)
Lower Belt
scribe here