Using the Control Panel
Roman
Sans Serif
Courier
Draft Condensed
You can control simple printer operations—such as line
feeding, form feeding, loading and ejecting paper, and selecting
fonts—with the buttons on the control panel. The control panel
lights show the printer's status and the current font.
Lights and buttons
Pause light
The orange Pause light is on when the printer stops printing.
Each time you turn on the printer, the light flashes briefly.
When the printer is out of paper, the light flashes and the
beeper sounds three times. The light also flashes when you can
tear off the last sheet of continuous paper at the edge of the
printer cover.
The Pause light goes on and the beeper sounds if an error
occurs.
Font 1 and Font 2 lights
The green Font lights, 1 and 2, indicate the current font setting.
For more about selecting fonts, see page 2-4.
While in the micro adjust mode, the Font lights flash. See
"Adjusting the loading position" on page 2-5.
2-2
Using the Printer
Prestige
Script
D r a f t
1
2
Micro Adjust
Font
LF/FF
Paper Park
Pause
3sec